How to maintain and care for your Crittall windows
- 4 November 2026|
- News|
Crittall steel windows are known for their slim frames, distinctive appearance and long-lasting construction. To keep them looking their best and operating smoothly, regular maintenance is important. From cleaning the frames to checking a Crittall window handle for signs of wear, simple care can prevent minor issues from developing into more costly repairs.
Whether you have traditional steel casement windows in a period property or steel sash windows, routine checks help maintain their condition and preserve the slimmer look of steel.
This guide explains how to care for your Crittall windows, covering cleaning, lubrication, hardware upkeep and repainting.

Routine cleaning
Regular cleaning removes dirt and grime while giving you an opportunity to check the condition of your steel windows.
Modern Crittall steel windows use hot-dip galvanising and a Duralife powder-coated finish. Crittall recommends mild detergent and a soft cloth or sponge for cleaning frames and glass. Avoid abrasive pads, solvents and harsh chemicals that could damage the finish.
How to clean your Crittall windows
Follow these simple steps:
- Remove loose dust and grit with a soft brush.
- Wash the frames using warm water and mild detergent.
- Pay attention to corners, rebates and areas around hinges.
- Rinse with clean water and dry with a soft cloth.
Internal steel windows and screens can also be cleaned with a soft cloth. If your property is near the coast or a busy road, clean external frames more frequently to remove salt and accumulated grime.
Aim to clean your Crittall windows every six to 12 months, or more frequently if they are exposed to coastal conditions or heavy grime. During these checks, inspect the frames, hinges, handles and weather seals for signs of damage. Modern galvanised and powder-coated frames do not normally require repainting, but any chips or scratches should be assessed and repaired to protect the finish.
Lubricating hinges, stays and moving parts
Hinges, stays and handles need occasional attention. Without suitable lubrication, they can become stiff and make windows difficult to operate.
During routine maintenance, apply a light-duty lubricant, such as WD-40, to hinges and handles. Follow these simple steps:
- Apply a small amount to hinge pivots and relevant moving parts.
- Open and close the window several times to distribute it.
- Wipe away excess lubricant to prevent dust collecting around the fittings.
- Check weather seals for visible gaps or damage.
Checking your windows in spring and autumn can help identify developing problems before they affect their operation.
Caring for your Crittall window handle and hardware
Handles and other window furniture contribute to the overall appearance and functionality of Crittall steel windows. Whether you prefer simple, understated fittings or more decorative designs, choosing the right hardware can complement your property’s character and provide a finishing touch that suits both traditional and contemporary interiors.
Routine handle care
Look out for the following:
- Loose fixings: Check whether the handle moves more than it should. Tighten loose screws carefully without forcing older fittings.
- Stiff operation: If the handle is difficult to turn, check whether the mechanism needs cleaning or lubrication.
- Worn finishes: Use a soft, slightly damp cloth and avoid abrasive products or metal polishes.
- Damaged components: Look for visible wear around the catch fastener and other moving parts.
Not every Crittall window handle uses the same fittings, particularly on older installations. Check the existing hardware before ordering replacements.

Choosing replacement Crittall window handles
Older Crittall window handles can become worn or damaged over time. Finding suitable replacements can be difficult because fittings and designs have changed across different generations of steel windows.
Crittall offers a range of window hardware, including straight, curved, scroll and arched casement handles. Its Luxury Collection also includes Phoenix, Deco, Berkeley and Soho designs, providing different styles to complement Crittall steel windows. Some designs feature a slight arch, while others have more distinctive decorative detailing.
When choosing replacement handles, consider the existing fittings and the style of your particular home. The right design should complement the slimmer look of steel without detracting from the original character of your windows.
If you’re looking for replacement handles, our Crittall parts service can help identify and source suitable fittings, hinges, stays and other components for older and current installations.
Handle finishes also influence the overall appearance of your windows. We can help you find suitable hardware to complement your existing frame colour and surrounding interior. This is particularly worth considering in contemporary interiors, where smaller details can make a noticeable difference.
Repainting and caring for the finish
The maintenance required depends on the age and original finish of your steel windows. Modern Crittall products and older painted frames need different levels of attention.
Modern galvanised and powder-coated frames
Modern Crittall steel windows use hot-dip galvanising and a factory-applied Duralife powder coating to protect against rusting, peeling and flaking. As a result, routine repainting is not normally required.
Inspect frames periodically for accidental chips or scratches. Any damage to the coating should be assessed and repaired appropriately to maintain the underlying protection.
Crittall windows are available in different colours to complement your property. If you are considering steel replacement windows for a renovation or single storey extension, think about how the finish will work with the existing architecture. The right colour can suit traditional properties and contemporary interiors while retaining the appearance of traditional steel windows.

Older painted frames
Older steel windows may have been painted without the galvanised and powder-coated protection used on modern Crittall products. Their condition depends on the original finish and how well they have been maintained.
Check older frames regularly, paying particular attention to:
- Bottom rails and corners where moisture can collect.
- Bubbling, peeling or lifting paint.
- Small chips where corrosion may begin.
- Hinges and mechanical joints where paint can build up.
- The bottom sash on applicable window designs, where dirt and moisture may collect.
When maintaining old Crittall window handles and fittings, remember that older installations may use different hardware from modern steel replacement windows. Pay close attention to the catch fastener and surrounding components before sourcing replacements.
Touching up minor damage early may help prevent further deterioration. However, where corrosion or paint failure is extensive, repainting alone may not address the underlying problem.
We offer specialist restoration services for existing Crittall windows. Our team can assess their condition and recommend whether restoration or replacement is the most suitable option.
Early signs of wear to look out for
Most window problems develop gradually. Recognising the warning signs helps you arrange repairs before damage becomes more extensive.
Look out for:
- Stiff handles or hinges: These may need adjustment or replacement if cleaning and lubrication do not help.
- Dropped casements: A window that catches against the frame could have an alignment issue.
- Draughts or rattling: These may indicate damaged weather seals, loose fittings or poor alignment.
- Rust spots or bubbling paint: These can suggest deterioration of the protective finish.
- Damaged glazing putty: On older installations, deteriorating putty may need attention.
These problems do not automatically mean your windows need replacing. A specialist may be able to restore their operation by adjusting fittings, replacing worn components or addressing localised damage.
Find out more about our Crittall window restoration process and the options available for older steel windows.

When should you call a specialist?
You should contact a specialist if a handle, hinge or casement remains stiff after basic cleaning and lubrication, corrosion has spread or a window no longer closes and seals properly. Early assessment can identify whether adjustment, replacement parts or more extensive restoration is needed.
Removing casements, replacing hinges, re-glazing and treating corrosion within steel frame sections require suitable knowledge and components. Attempting these repairs without the right experience could cause further damage.
We provide maintenance, adjustment and restoration services for Crittall steel windows. Our team can assess existing installations and recommend an appropriate course of action.
Keep your Crittall windows working well
We have decades of experience working with Crittall steel windows. We understand how regular maintenance can protect existing installations, prevent avoidable deterioration and help extend the lifespan of your windows.
Whether you need help identifying old Crittall window handles, sourcing replacement hardware or arranging restoration work, our team is here to help. We can identify suitable parts and recommend the most appropriate solutions for your windows.
Call us on 0208 523 2081, email enquiries@metwin.co.uk or contact us online to discuss how we can help.
Follow Metwin News on Google
Stay up to date with the latest Metwin news, Crittall steel window and door developments, restoration projects and expert advice by adding us to your preferred sources in Google Search.
ADD METWIN TO GOOGLE PREFERRED SOURCES




